KolliPack

Preliminary engineering estimate
Corrugated engineering

Corrugated Material & Strength

Compare preliminary FEFCO 0201 material, geometry, pallet loading, compression and material-based CO₂ screening indicators.

How to use this tool

Select an active admin-managed board construction or enter one-time board properties. Results are preliminary engineering estimates. Confirm final specifications with the corrugated supplier and representative testing.

Section 1

Box and product

FEFCO 0201 geometry uses the entered internal dimensions directly.

Advanced geometry inputs
Section 2

Pallet and stacking

Existing pallet catalogue records are reused; manual dimensions are not saved.

Section 3

Corrugated board

Wall / flute
Single wall · E
Combined grammage
377.25 g/m²
Actual caliper
Not stored
Actual / supplier ECT
Not stored
Measured BCT
Not stored
Source
Illustrative derived · Illustrative construction derived from published ranges

Manual values are used once for this calculation and are not saved to the board catalogue.

Reference strength category

Reference ECT categories are industry screening classes. Actual ECT depends on the complete paper construction and manufacturing performance.

Select a board construction or manual flute to filter categories.

Optional supplier or measured values for this calculation

These one-time values take priority over reference data and are not persisted. Enter both ECT and actual finished-board caliper for a McKee estimate. Nominal flute height is never used as caliper.

Section 4

Distribution condition

The distribution factor is a simplified screening allowance. It is not a detailed humidity, creep or vibration model.

Section 5

Carbon screening

Material-based CO₂ screening only; this is not a formal product carbon footprint.